RailMaster™ Power Feed Hydraulic Rail Drill
 |
Put less work into your rail drilling with the Power Feed RailMasterTM Hydraulic Rail Drill. It can drill up to a 1-11/16" holes using the easy to install Twister BitsTM in standard rail in 28 seconds and under 35 seconds in fully heat treated rail. The drill operates at 5 GPM and 2000 PSI with a 4 HP motor, while weighing just 48 lbs. The RailMaster provides high clamping forces, and is easy to carry and operate by one person. A simple forward/reverse lever turns the quill feed arbor on or off. Plus it has place holders for extra Twister Bits. Clamps are availabe for drilling crane or girder rail. |
Specifications
| Power Option |
Model No. |
Part No. |
Description | Motor | RPM | Max. Hole Diameter |
Rail Capacity, lbs. |
Unit Weight, lbs. |
| Hydraulic | RM42 | 0042602 | High Torque Power Feed |
4 HP 2000 PSI @ 5 Gal./Min. |
150 | 1-11/16" | 70-155 | 48 |
Options
27541 |
Pig Tail extensions |
27556* |
Clamp for Crane Rail* |
27559 |
Clamp for Girder Rail |
| Order Today at (866) 245-3745 |
| Home | Products | Support | Demo Request | Contact |