| Rail Saw Tips:
Use proper fuel mixture 50:1.
Use clean air filters and check spark plug regularly.
Use Trak-Star's Trak-Blades™ for best cutting performance.
Be sure to use paper "Blotters" to help ensure blade is held tightly into place.
Wear proper safety equipment.
You can expect to get 6 to 8 cuts per blade depending on the rail. When blade wears and can no longer cut through the entire rail from one side, continue cutting from the other side to finish cut.
Apply even pressure on the saw throughout the cut. Also keep saw moving in a steady back and forth motion. Both these techniques keeps the blade from glazing.
Here is the proper way to cut thru the rail:
|
